Latest Products
Sort by
Show result

• 2 x 30 Liter bags for a total of 60 Liters carrying capacity
• Each pannier is 14.2" L x 9.9" W x 13" H

 

 

RM1,599.98

The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).

RM69.00

The Brembo M4 Calipers is an entry level caliper in Brembo’s lineup that brings MotoGP derived monoblock technology within the reach of all motorcycle enthusiasts. The monoblock design allows the caliper to be finished as a single piece, making it incredibly lightweight with unrivalled stiffness and precision. The hydraulic system has been painstakingly optimised, and the use of 34mm diameter pistons has further increased its renowned power and controllability. Retaining each brake pad are special guides built within the caliper allowing for extremely quick and easy brake pad replacement. By upgrading to a Brembo caliper, you will be rewarded with a dramatic improvement in stopping power, consistency and brake feel.

Since its introduction, the Brembo M4 has become one of the most popular brake caliper options thanks to its cost and performance benefits. Many major motorcycle manufacturers from Europe and Japan have begun equipping M4 Calipers as standard equipment on their motorcycles. For years, the legendary circuits of MotoGP and the World Superbike Championship have been dominated by teams using Brembo braking systems, demonstrating the technological supremacy and unparalleled experience of the Italian brand.

Features:
Cast aluminum construction
Titanium anodized finish
Single piece monoblock design
Hand painted embossed Brembo logo
Four 34mm aluminum pistons
Weight without pads: ~800 gr
Compatible disc height: 32-34mm
Brake fluid: DOT 4
Compatible with OEM Brembo, SuperSport and T-Drive rotors
Brembo Caliper Spacer Kits available (sold separately)
Sold as a pair

Includes:
2 x Brembo M4 Caliper
2 x Brembo sintered brake pads
2 x Banjo bolts
4 x Copper crush washers
2 x Thermal sensitive caliper tape
User’s manual

RM2,750.00

TECHNICAL DATA
- Length: 104-148 cm
- Pad Length: 24 cm
- Pad Width: 8 cm
- Weight: 180 g

PREMIUM ERGONOMICS
Carrying heavy loads has never been so comfortable with the breathable 3-layer pad, pressure distribution over a large area and a unique angled design.

FEATURES
- Fully adjustable on both ends
- For use on both the left and the right hand side
- Angled pad for comfort and to prevent the strap from slipping down your shoulder
- Heavy duty hook with sturdy polymer body and stainless steel lock
- 360° swivel mechanism on both hooks helping you to move freely and with ease
- Washable and easy to clean
- Built to last

RM114.98

The RAM-B-272U consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW.

RM68.00
  • Package contains 2 straps (12mm width).
  • Adjust from 300mm to 720mm
RM80.00

The RAM®Torquebar mount has a 1” rubber ball and accommodates rails 3/8” to 5/8” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. The RAM-B-408-37-62U allows for mounting to scooter mirror rails as well as vehicle headrests and other round rails within the stated dimensions.

RM108.00

The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".

RM108.00

The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.

RM98.00

Extend the volume of your Monsoon Saddle Bags, Tornados or aluminum panniers by adding one or more XS 6.5 or XS 12 Base Packs.
If you prefer to travel light, simply attach any XS Base Pack directly to the rear of your bike or alternatively your luggage rack. Stainless steel hardware is provided to bolt the mounting straps down to the fender of your sport enduro.

RM284.98

Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with a B-size RAM®Mounts ball directly attached. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM®Mounts has refined the self-leveling action to keep your cups full.

RM167.00

The RAM-B-309-1U connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".

RM69.00

The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball centered. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. This mount is not compatible with the 2016 BMW R1200RT.

RM109.00
  • Package contains 2 straps (24mm width).
  • Adjust from 450mm to 1500mm.
RM84.00

The Brembo M4 Calipers is an entry level caliper in Brembo’s lineup that brings MotoGP derived monoblock technology within the reach of all motorcycle enthusiasts. The monoblock design allows the caliper to be finished as a single piece, making it incredibly lightweight with unrivalled stiffness and precision. The hydraulic system has been painstakingly optimised, and the use of 34mm diameter pistons has further increased its renowned power and controllability. Retaining each brake pad are special guides built within the caliper allowing for extremely quick and easy brake pad replacement. By upgrading to a Brembo caliper, you will be rewarded with a dramatic improvement in stopping power, consistency and brake feel.

Since its introduction, the Brembo M4 has become one of the most popular brake caliper options thanks to its cost and performance benefits. Many major motorcycle manufacturers from Europe and Japan have begun equipping M4 Calipers as standard equipment on their motorcycles. For years, the legendary circuits of MotoGP and the World Superbike Championship have been dominated by teams using Brembo braking systems, demonstrating the technological supremacy and unparalleled experience of the Italian brand.

Features:
Cast aluminum construction
Titanium anodized finish
Single piece monoblock design
Hand painted embossed Brembo logo
Four 34mm aluminum pistons
Weight without pads: ~800 gr
Compatible disc height: 32-34mm
Brake fluid: DOT 4
Compatible with OEM Brembo, SuperSport and T-Drive rotors
Brembo Caliper Spacer Kits available (sold separately)
Sold as a pair

Includes:
2 x Brembo M4 Caliper
2 x Brembo sintered brake pads
2 x Banjo bolts
4 x Copper crush washers
2 x Thermal sensitive caliper tape
User’s manual

RM2,789.00

The Brembo M50 Caliper features a refined and compact monoblock body that was designed to guarantee excellent power and braking modulation. Monoblock braking technology was originally introduced by Brembo to MotoGP in the early 90s with great success. Since then Brembo has continued to push the performance envelope - the M50 Caliper is no exception. Its single piece cast aluminum body and triple bridge design ensures absolute stiffness under the heaviest of braking. The four 30mm pistons make it possible for the caliper to transmit more precise feedback to the master cylinder, brake lever and the rider’s fingers.

Each M50 Caliper weighs only ~700 gr (1.54 lb). This is possible thanks to the use of topological optimisation software which allows Brembo to remove any excess material without compromising the caliper’s structural integrity. The titanium anodized finish helps dissipate heat built up under hard and extensive braking. Seating the brake pads are special guides that eliminate the need for brake pad pins, making it quick and simple to swap brake pads at home or in the pits.

Features:
Cast aluminum construction
Titanium anodized finish
Single piece monoblock design
Hand painted embossed Brembo logo
Four 30mm aluminum pistons
Weight without pads: ~700 gr
Compatible disc height: 32-34mm
Brake fluid: DOT 4
Compatible with OEM Brembo, SuperSport and T-Drive rotors
Sold as a pair

Includes:
2 x Brembo M50 Caliper
2 x Brembo sintered brake pads
4 x Copper crush washers
2 x Thermal sensitive caliper tape
User’s manual

RM3,298.00

The Brembo Corsa Corta Master Cylinder thrives. It features three different bite-point settings: Normal, Sport and Race.

In the Normal setting, the bite point starts more gradually, making it ideal for city riding, touring or braking in poor grip conditions.

In the Sport setting, the beginning of the bite point is shorter than in the Normal setting. This setting produces a more dynamic response suitable for sportier riding.

In the Race setting, the position of the cam mechanism shortens the initial stage of the bite-point even further to produce the same immediate response of the master cylinders used in MotoGP. This allows the rider to reach the bite-point almost instantaneously and makes this setting ideal for use on the race track.

This adjustability combined with the MotoGP-derived RCS system allows the Corsa Corta to go anywhere and brake confidently no matter how or where you ride.

The Brembo RCS System allows the rider to choose between more power or more precision to best complement their riding style, track/street conditions and other brake components. The unique design of the RCS system offers the flexibility to change the brake lever ratio at the turn of a screw. The 20mm setting provides a more reactive braking response and the 18mm setting allows for better feel and modulation. Additionally, the Brembo lever features an adjustable thumb screw that can be customized to fit a range of riders’ hands. In the event of a crash, the outer portion of the lever folds up and away to avoid damage. The patented master cylinder is constructed of forged aluminum and then CNC machined down to remove any excess weight. All of its components, including the piston, seals and pushrod, are the same as those used in MotoGP and WSBK.

Features:
Adjustable bite-point
Race, Sport and Normal settings
RCS (Ratio Click System)
Forged aluminum body
Hard anodized finish
Adjustable and folding aluminum lever
Large 19mm piston
Brake fluid: DOT 4
Mounts to most 22mm (⅞) diameter handlebars
Includes universal brake light switch
Includes double banjo bolt (M10x1.0)
Brembo Brake Reservoir Kit available (sold separately)
Brembo Remote Adjuster available (sold separately)
Compatible with most OEM ABS brake systems

RM1,418.00

The Brembo 19RCS Master Cylinder is optimized for dual-caliper, four-piston braking systems. It utilizes a massive 19mm piston that provides the maximum amount of stopping power possible.

The Brembo RCS Brake Master Cylinder allows the rider to choose between more power or more precision to best complement their riding style, track/street conditions and other brake components. The unique design of the RCS system offers the flexibility to change the brake lever ratio at the turn of a screw. The 20mm setting provides a more reactive braking response and the 18mm setting allows for better feel and modulation. Additionally, the Brembo lever features an adjustable thumb screw that can be customized to fit a range of riders’ hands. In the event of a crash the outer portion of the lever folds up and away to avoid damage. The patented master cylinder is constructed of forged aluminum and then CNC machined down to remove any excess weight. All of its components, including the piston, seals and pushrod, are the same as those used in MotoGP and WSBK.

Features:
Forged aluminum body
Hard anodized finish
Adjustable and folding aluminum lever
Large 19mm piston
Lever ratio of 18mm and 20mm
Weight: ~350 gr
Brake fluid: DOT 4
Mounts to most 22mm (⅞) diameter handlebars
Includes universal brake light switch
Includes double banjo bolt (M10x1.0)
Brembo Brake Reservoir Kit available (sold separately)
Brembo Remote Adjuster available (sold separately)
Compatible with most OEM ABS brake systems

RM1,198.00
  • With waterproof 3-layer fabric, rolltop closure and an all-welded design the bags remain 100% waterproof.
  • The 3-layer fabric is a supreme high-tech product. The outer layer of extremely abrasion resistant polymer protects your belongings while the inner layer is made of high visibility red vinyl. In between a 1000D Nylon mesh is embedded for superior tear resistance.
RM339.98