The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).
The RAM-B-272U consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW.
- Features a 9mm hole designed to attach to the mirror frame of motorcycles
- Included B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
- Ball adapter attaches directly to GoPro mounting base
- Included B size 1" RAM rubber ball allows for connection to any B size RAM double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of high-strength composites for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
The RAM-B-345U brake/clutch reservoir cover base fits cleanly over your existing reservoir cover with the 1" ball centered. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. This mount is not compatible with the 2016 BMW R1200RT.
- Utilize your existing reservoir cover with this ball base for motorcycles; hardware included
- Compatible with any B size RAM® Mounts double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
The RAP-B-200-2U consists of double 1" diameter open ball sockets with a 360° rotation point at the center and a connecting swivel joint that rotates forward and back 180°. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit.
- Diamond plate features industry-standard AMPS hole pattern and measures 2.43" x 1.31"
- Compatible with several RAM® device holders and cradles; ball and socket technology allows for near-infinite adjustability
- Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
HOLE PATTERN: 2-Hole AMPS: 1.912"
PLATE SIZE: 2.43" x 1.31"
BALL/SOCKET SIZE: B Size (1")
WEIGHT CAPACITY: 2 lbs
MATERIALS: Marine-grade aluminum
WEIGHT: 0.1 lbs.
- RAM Mounts long double socket arm, has a socket at both ends that accommodates B Size 1" balls.
- Overall Length: 6"
- Socket-To-Socket Length: 5.31"
The RAM locking knob, includes a brass 1/4"-20 thread, for 1" (B size) socket arms; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it.
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with a B-size RAM®Mounts ball directly attached. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM®Mounts has refined the self-leveling action to keep your cups full.
The RAM-B-309-1U connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Have an M8 by 25, 30, or 35mm handlebar bolt? The RAM-B-367U will replace that bolt with a standard ball-mount to put just about anything there! This part is compatible with any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.
- Features an 11mm hole designed to attach to the mirror frame of motorcycles
- Included B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of Powder-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments
- Backed by a lifetime warranty
BACKED BY A LIFETIME WARRANTY
MADE IN USA
- Standard RAM® double socket arm provides an ideal overall length of 3.73" and a socket-to-socket length of 3"
- Attaches to any B size RAM® ball component, including mounting bases and device holders
- Double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
- Backed by a lifetime warranty
- Low-profile design with an overall length of 2.42" and socket-to-socket length of 1.75"
- Attaches to any B size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
- Made of high-strength composite for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
- RAM Mounts medium double socket arm, has a socket at both ends that accommodates B Size 1" balls.
- Overall Length: 2.42"
- Socket-To-Socket Length: 1.75"
- RAM Mounts short double socket arm, has a socket at both ends that accommodates B Size 1" balls.
- Overall Length: 3.73"
- Socket-To-Socket Length: 3"
- Connects to your handlebar clutch/brake clamp with provided 40mm x 6mm stainless steel hardware
- Compatible with any B size RAM® Mounts double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
- Designed to fit into the cylindrical bore wall of fork stems
- Included B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
- Backed by a lifetime warranty