Bestsellers
Sort by
Show result
  • Package contains 2 straps (24mm width).
  • Adjust from 450mm to 1500mm.
RM84.00

Engine Ice Hi-Performance Coolant is engineered to maintain optimum operating temperature and reduce power loss from excess heat.

RM128.00
  • Low-profile design with an overall length of 2.42" and socket-to-socket length of 1.75"
  • Attaches to any B size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
  • Made of high-strength composite for durability and reliability in the most demanding environments
  • Backed by a lifetime warranty
RM54.00
  • Standard RAM® double socket arm provides an ideal overall length of 3.73" and a socket-to-socket length of 3"
  • Attaches to any B size RAM® ball component, including mounting bases and device holders
  • Double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
  • Backed by a lifetime warranty
RM64.40

Backed by a lifetime warranty

RM79.00
  • With waterproof 3-layer fabric, rolltop closure and an all-welded design the bags remain 100% waterproof.
  • The 3-layer fabric is a supreme high-tech product. The outer layer of extremely abrasion resistant polymer protects your belongings while the inner layer is made of high visibility red vinyl. In between a 1000D Nylon mesh is embedded for superior tear resistance.
RM339.98

Another must have from the Acerbis No Water bag and pack waterproof collection.

RM179.00

The RAM Mounts X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic.

  • Minimum Width = 1.75" (Minimum Height = 5.5")
  • Maximum Width = 4.5" (Minimum Height = 3.25")
  • Depth = 0.875"
RM156.90
  • 113 Decibels at 3 feet
  • Operating voltage:12 Volts (11.7volts required)
  • Power draw: 5 Amps
  • Single piece design
  • Dimensions: Approximately 3.25" x 3.4" x 2.5"
  • Stylish all black design
  • Fits in most factory horn locations
RM185.00

Battery Type:

YTZ10S

Battery Family:

Factory Activated, Maintenance Free

Voltage:

12

Capacity:

8.6

Dimensions:

6 in. x 37⁄16in. x 311⁄16in.

Weight:

7 lbs.

Metric Dimensions:

150mm x 87mm x 93mm

Acid Volume:

N/A

Amps:

0.9

C.C.A:

190

Country:

Japan

Terminal:

https://www.yuasabatteries.com/wp-content/uploads/2018/07/MainPosNeg.png

RM428.00

Another must have from the Acerbis No Water bag and pack waterproof collection.

RM199.00

The RAP-S-KNOB3U consists of a 1/4"-20 female threaded security knob and key knob. The RAP-S-KNOB3U replaces all knobs on 1" diameter B size arms and mounts. The RAP-S-KNOB3U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOB3U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-KNOB3U is the perfect accessory for keeping your mounted electronic device safe from theft and tampering.

RM49.00

The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

RM59.70

QUICK FACTS
- Adjustment range: 400-1400mm
- Strap width: 25mm
- Can be used on any luggage rack

ROKstraps MADE EVEN BETTER
ROKstraps: For years, ROKstrap have set the standard for highest tensions, comfort, safety and durability. Thanks to their innovative usage of rubber elements as part of the straps construction, ROKstraps are the strongest tie-down straps available today.
Together with ROKstraps we enhanced this product especially for the use with adventure bikes.
ROK 1400 from ENDURISTAN uses exclusively the ENDURISTAN family buckles, the most robust buckle available on the market today. Additionally, we have created a completely new method of fastening the straps - optimised for the usage on racks with thin slots and even increasing the adjustment range.

SCOPE OF SUPPLY
- 2 pieces

RM119.98
  • RAM Mounts long double socket arm, has a socket at both ends that accommodates B Size 1" balls.
  • Overall Length: 6"
  • Socket-To-Socket Length: 5.31"
RM98.00
  • The RAM Mounts X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic.
  • Minimum Width = 1.875" (Minimum Height = 4.25")
  • Maximum Width = 3.25" (Minimum Height = 2.25")
  • Depth = 0.875"
RM142.50

The RAM-B-272U consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW.

RM68.00
  • RAM Twist-Lock suction cup base is ideal for vehicle windshields and other nonporous surfaces
  • Includes diamond ball base compatible with any B size RAM double socket arm; ball and socket technology allows for near-infinite adjustability
  • Made of high-strength composite and powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
  • Backed by a lifetime warranty
RM91.10

The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications.

RM138.00
  • RAM Mounts short double socket arm, has a socket at both ends that accommodates B Size 1" balls.
  • Overall Length: 3.73"
  • Socket-To-Socket Length: 3"
RM79.00

The RAM®Torquebar mount has a 1” rubber ball and accommodates rails 3/8” to 5/8” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. The RAM-B-408-37-62U allows for mounting to scooter mirror rails as well as vehicle headrests and other round rails within the stated dimensions.

RM108.00
  • 2" Diameter
  • Indestructible- Made from reinforced Zytel
  • Excellent visibility- SAE spec convex lens
  • Housing guaranteed against breakage
  • Made in the USA
RM135.00
  • RAM Mounts medium double socket arm, has a socket at both ends that accommodates B Size 1" balls.
  • Overall Length: 2.42"
  • Socket-To-Socket Length: 1.75"
RM86.00