• Piston diameter: 14mm
• Lever Ratio: 16-18mm
• Lever Type: LL
• Type: Radial
• Material: F.AL
• Surface Protection: HA
• Weight: 350g
• Brake Light Micro-Switch: NO
• Handlebar Fixing: 22.2mm
• Brake Fluid: DOT 4

• Piston diameter: 16mm
• Type: Radial
• Weight: 350g
• Brake Light Micro-Switch: NO
• Handlebar Fixing: 22.2mm
• Brake Fluid: DOT 4

• Sound Output: 120 dB at 3 feet 
• Current Draw: 20 Amp 
• Dimensions: 5.4” (137mm) wide x 4.5” (116mm) high x 3.6” (86 mm) deep 
• Stylish All Black Design
• CANbus compatible

• 113 Decibels at 3 feet
• Operating voltage:12 Volts (11.7volts required)
• Power draw: 5 Amps
• Single piece design
• Dimensions: Approximately 3.25" x 3.4" x 2.5"
• Stylish all black design
• Fits in most factory horn locations

• 120 Decibels at 3 feet
• Operating Voltage: 12V
• Power Draw: 20 amps
• Size (Compressor): 4.5" x 2.9" x 3.0"
• Size (Acoustic Unit): 4.1" x 3.7" x 3.4"
• Housing: Two Part Design
• CANbus Compatible

• CNC machined billet aluminum
• Nickel plated coating
• 2-piece caliper design
• Hand painted embossed Brembo logo
• Four 32mm aluminum pistons
• Weight without pads: ~1000 gr
• Compatible disc height: 32-34mm
• Brake fluid: DOT 4
• Compatible with OEM Brembo, SuperSport and T-Drive rotors
• Brembo Caliper Spacer Kits available (sold separately)
• Sold as a pair

Note: Additional Brembo Caliper Spacer Kit may be required to install these calipers, please reference the fitment chart below for further details.

• Weight reduced, 10% lighter than the M4 monoblock
• Cooling ribs so the calipers surface increases 30% for better heat removal
• Better stiffness by ribs
• Better stiffness by ribs
• Z04 racing pads optional
• New level in braking performance and controll
• One peace caliper
• 108 mm wheelbase
• 4 x 30 mm pistons
• Piston diameter xx mm
• Pistion with sealing
• Brake rime size 32-34 mm
• Offset 22,5 mm
• No brake pad pin necessary
• Anti vibration spring for the brake pads
• Brake fluid: DOT 4
• Brembo Logo red hand painted

• Piston Diameter: 16mm
• Lever Ration: 16mm/18mm (adjustable)
• Lever Type: LL
• Type: Radial
• Material: Forged Aluminum
• Finishing: Hard Anodized
• Weight: 350gr
• Brake Microswitch: No
• Handlebar Fixing: 22.2mm
• Brake Fluid: DOT4

• Piston Diameter: 19mm
• Lever Ration: 18mm/20mm (adjustable)
• Material: Forged Aluminum
• Lever Type: LL
• Type: Radial
• Finishing: Hard Anodized
• Weight: 350gr
• Brake Microswitch: No
• Handlebar Fixing: 22.2mm
• Brake Fluid: DOT4

• Flex adhesive ball base provides a strong mounting surface in a wide variety of use cases, such as a vehicle dash
• Included B size 1" RAM rubber ball allows for connection to any B size RAM double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of high-strength composites for durability and reliability in the most demanding environments
• Backed by a lifetime warranty

• Ball adapter attaches directly to GoPro mounting base
• Included B size 1" RAM rubber ball allows for connection to any B size RAM double socket arm; ball and socket technology allows for near-infinite adjustability
• Made of high-strength composites for durability and reliability in the most demanding environments
• Backed by a lifetime warranty

• Includes four black rubber post caps to keep your device secure when mounted in the RAM X-Grip phone or tablet holder
• Compatible with all versions of the RAM X-Grip
• Made of rubber; super glue included
• Backed by a lifetime warranty

• Reservoir mounting kit for RCS radial master cylinder.
• Can be used with any master cylinder that has a vertical split where the clamp mounts the master cylinder to the handlebar.